Avalon A60 eXtreme HVLP 1.3mm Spray Gun – The sweet spot for clean base and clear

A difficult blend can unravel fast when the gun lays color unevenly across an edge, a curve, or a repaired section. The painter slows down, changes distance, and adds another pass, yet the coat still feels inconsistent. More material disappears, more time is lost, and confidence drops because the previous setup never gave the control the job demanded.

That pressure gets even worse when clear has to stay clean, controlled, and efficient without flooding the panel. He keeps compensating with technique, overlap, and air pressure because the old gun forces him to choose between precision and pace. That frustration belongs to the tool he used before, and it is exactly why this 1.3 mm HVLP exists.

Avalon A60 eXtreme HVLP 1.3mm Spray Gun - Main features

The Avalon A60 eXtreme HVLP 1.3 mm is built for painters who want a light, precise spray gun that stays easy to control through long refinishing sessions. This version combines a 360 g body, a patented U-shaped nozzle, a new airflow system, U-groove nozzle geometry, and a three-orifice fan cap that widens the pattern and helps keep it more stable across the panel.

Inside the eXtreme HVLP lineup, the 1.3 mm setup is the balanced option. It keeps the same 34 cm pattern length and 9 cm pattern width as the 1.2 mm version, but increases fluid flow to 230 ml/min. That gives you more output for basecoat and clearcoat work while staying cleaner and more controlled than the wetter 1.4 mm and 1.5 mm configurations.

• 🎯 1.3 mm nozzle size gives this version a stronger balance between control and material delivery than the 1.2 mm setup.
• 🌬️ Dual-stage atomization concept starts paint breakup before it exits the air cap for finer spray behavior.
• 📏 34 cm (13.3 in.) pattern length keeps the fan wide enough for real panel work.
• 💧 230 ml/min fluid flow adds useful output over 1.2 mm without jumping to the fuller 1.4 mm range.
• 🪶 360 g official weight keeps the gun light during longer refinishing sessions.

Technical features of Avalon A60 eXtreme HVLP 1.3mm Spray Gun

This HVLP platform starts breaking up paint before the material leaves the air cap. High-volume air passes through the center orifice, interacts with the U-shaped nozzle, and creates a dual-stage atomization effect that helps reduce overspray, improve transfer efficiency, and keep coverage more even across larger panels. The three-orifice fan cap also helps produce a wider pattern that feels easier to guide on doors, fenders, hoods, and blend areas.

For this exact 1.3 mm configuration, the working setup is highly specific: 29 PSI inlet pressure, 20 cm spray distance, 1 second trigger time, 34 cm pattern length, 9 cm pattern width, 3 turns on the pattern-control knob, full fluid-control setting, 460 L/min maximum air consumption, 4.1 kW / 5.5 HP minimum compressor, 230 ml/min fluid flow, and 360 g weight. The 1.2, 1.3, and 1.4 HVLP sizes also share the same A60-121314 nozzle and needle family. Spray data for this model is based on solvent-based coat mixed 1:1 and clearcoat mixed 2:1 under best-case conditions.

• 🎯 1.3 mm nozzle for a stronger balance between precision and material delivery.
• 📏 34 cm (13.3 in.) pattern length for stable panel coverage without feeling oversized.
• 📎 9 cm (3.5 in.) pattern width for controlled overlap and cleaner edge work.
• 💧 230 ml/min fluid flow for fuller output than 1.2 mm without jumping into the wetter 1.4 mm range.
• 🌫️ 460 L/min (16.2 CFM) max air consumption for true high-volume HVLP performance.
• ⚙️ 29 PSI inlet pressure for consistent atomization in the intended setup window.
• 🧱 5.5 HP minimum compressor to keep airflow stable during real spraying.
• 🪶 360 g weight to help reduce fatigue during longer jobs.
• 🔁 3 turns on the pattern knob with full fluid setting for the published 1.3 mm spray data.